Structures:Orthophthalic
Processes:Hand lay-up
Application:Suitable for hand lay-up molding of various fiberglass products.
ZC-P15 unsaturated polyester resin is a general-purpose resin with low viscosity, good mechanical strength and high elongation.
Suitable for hand lay-up molding of various fiberglass products.
| Property | Value | Unit | TM |
| Appearance | Light yellow transparent viscous liquid | – | – |
| Acid Value | 13-21 | mgKOH/g | GB/T 2895-2008 |
| Viscosity，25℃ | 0.25~0.45 | Pa.s | GB/T 7193-2008 |
| Solid Content | 61~67 | % | GB/T 7193-2008 |
| Thermal Stability,80℃ | ≥24 | h | GB/T 7193-2008 |
| Gel time | 10.5~21.5 | min | GB/T 7193-2008 |
| Property | Value | Unit | TM |
| Appearance | Cast body without defects | – | – |
| Barcol Hardness | 41 | – | GB/T 3854-2005 |
| HDT | 70 | ℃ | GB/T 1634-2004 |
| Break Elongation | 1.5 | Mpa | GB/T 2567-2008 |
| Tensile Strength | 112 | Mpa | GB/T 2567-2008 |
| Tensile Modulus | 4000 | Mpa | GB/T 2567-2008 |
| Flexural Strength | 60 | Mpa | GB/T 2567-2008 |
| Flexural Modulus | 4000 | Mpa | GB/T 2567-2008 |
| Property | Value | Unit | TM |
| Barcol Hardness | 67 | – | GB/T 3854-2005 |
| Flexural Strength | 310 | Mpa | GB/T 1449-2005 |
| Flexural Modulus | 17000 | Mpa | GB/T 1449-2005 |
| Tensile Strength | 300 | Mpa | GB/T 1447-2005 |
| Tensile Modulus | 16500 | Mpa | GB/T 1447-2005 |
1.ZC-1. P15 resin contains wax, does not contain accelerators and thixotropic additives.
2. Recommended curing system: special colorless accelerator 0.4-2.0%, MEKP curing agent 1-2%.In actual operation, the dosage of curing agent and accelerator depends on environmental conditions such as temperature and humidity, and it should be determined through small tests at the construction site.
Transportation should comply with the transportation and handling regulations of hazardous chemicals in Chapter 5 of the national “Regulations on the Safety Management of Dangerous Chemicals”. The product should
Store in a cool place below 25℃, avoid fire and isolate heat source. The shelf life is 3 months when stored below 25℃.
Structures:Isophthalic
Processes:Hand lay-up
Application:It has good rigidity and fast curing, and is suitable for fiberglass products with higher heat resistance requirements.
Structures:Orthophthalic
Processes:Hand lay-up
Application:ZC-981APT resin meets the certification requirements of China Classification Society (CCS).It is suitable for hand lay-up process to produce ordinary FRP products such as small FRP boats in inland rivers and automobile parts.
Synolite™ 8388-P-1 S features low shrinkage and low styrene emission properties. FRP made from this resin with low fiber print and low smells.
Atlac® 580 ACT is a high grade Bisphenol A Urethane Vinylester, dissolved in styrene. The resin is pre-accelerated and thixotropic. Atlac® 580 ACT features medium viscosity and medium reactivity.
Standard epoxy vinyl ester resin for hand lay-up and spray process
Atlac® 430 ACT is a pre-accelerated thixotropic, high grade bisphenol A vinyl ester resin.
Structures:Orthophthalic
Processes:Spraying-up Resin
Application:It is suitable for spraying to make surface decorative layers and protective layers of various ordinary fiberglass products.
Resin belongs to dangerous goods, and with the processing time, it will take approximately 5-15 working days to deliver
No district limit,We can export our chemicals to every corner of the world.
Yes.At present, We have three member factories, two of which are in the 300000 ton level, one under construction in the 200000 ton level, and one CNAS certified research and development center.
Samples generally deliver by international express, a large number of goods can be transported by land or water.
Specializing in unsaturated polyester resin 100% tested and working before shipment .best price will grant you as per your quantity .
We have been certified by Lloyd's Register and China Classification Society
We have plans to establish overseas factories in places like Vietnam
Resin formulation fine-tuning andformulation improvement can further improve theenvironmental profile of composites
We intelligently identify potential occupational hazards, implement control measures to reduce risks, provide necessary training and equipment, and monitor the occupational health status of employees.
The minimum order quantity for our products varies depending on the product. Please contact us for more information.
Yes, we offer OEM services.
Feel safe and free to fill in the form! We do not sell, trade or transfer your personally identifiable information to any external parties.
