Unsaturated Polyester Resin ZC-1076 DCPD Resin
Structures:DCPD
Processes:Casting Resin
Application: It is suitable for products such as ordinary marble glue, anchoring agent/rebar glue, etc.
Atlac® 580 ACT is a high grade Bisphenol A Urethane Vinylester, dissolved in styrene. The resin is pre-accelerated and thixotropic. Atlac® 580 ACT features medium viscosity and medium reactivity.
Atlac® 580 ACT is a high grade Bisphenol A Urethane Vinylester, dissolved in styrene. The resin is pre-accelerated and thixotropic. Atlac® 580 ACT features medium viscosity and medium reactivity.
Atlac® 580 ACT is specially developed to meet the requirements of hand lay-up and spray-up applications. The resin is recommended for the fabrication of chemical resistant equipment and marine applications.
Atlac® 580 ACT has excellent wet out and de-aerating properties for easy processing. Compared to conventional Vinylester resins foaming after MEK peroxide addition is highly reduced in Atlac® 580 ACT leading to less air inhibition inside the laminate and on the surface. Due to its urethane incorporation, Atlac® 580 ACT features enhanced thixotropic behavior preventing rinse off inclined mold surfaces and shows an improved compatibility with aramid fiber reinforcements. Atlac® 580 ACT provides low exothermic reaction during cure allowing thick sections to be fabricated in one go, however through cure in thin laminates is favored by excellent curing behavior. Final products made with Atlac® 580 ACT show excellent hydrolysis resistance and good thermal stability. Atlac® 580 ACT is resistant to many aqueous media, acidic salts, alkaline media and hot water. The resin offers an outstanding combination of heat resistance and flexibility.
Cured non-reinforced Atlac® 580 ACT conforms to type 1310 according to DIN 16946/2. According to EN13121/1 Atlac® 580 ACT is classified group 7B. The resin is certified by Lloyd’s Register and Registro Navale Italiano (R.I.Na.) as laminating resin for use in Marine applications.
Structures:DCPD
Processes:Casting Resin
Application: It is suitable for products such as ordinary marble glue, anchoring agent/rebar glue, etc.
Structures:Orthophthalic
Processes:Casting Resin
Application: It is suitable for ordinary anchoring agents.
Structures:Orthophthalic
Processes:Hand Lay-up Resin
Application:It has been dissolved in cross-linking monomers such as styrene and MMA, and has low viscosity and medium reactivity.
Structures:Isophthalic
Processes:Gel Coat Resin
Application:It has been dissolved in styrene cross-linking monomer, contains thixotropic additives, and has medium viscosity and medium reactivity.
Structures:Isophthalic
Processes:Gel Coat Resin
Application:It is suitable for the surface decoration and protective layer of FRP products or sanitary ware products by brushing process.
Structures:DCPD
Processes:Casting Resin
Application:It has been dissolved in cross-linking monomers such as styrene, has low viscosity and moderate reactivity.
Resin belongs to dangerous goods, and with the processing time, it will take approximately 5-15 working days to deliver
No district limit,We can export our chemicals to every corner of the world.
Yes.At present, We have three member factories, two of which are in the 300000 ton level, one under construction in the 200000 ton level, and one CNAS certified research and development center.
Samples generally deliver by international express, a large number of goods can be transported by land or water.
Specializing in unsaturated polyester resin 100% tested and working before shipment .best price will grant you as per your quantity .
We have been certified by Lloyd's Register and China Classification Society
We have plans to establish overseas factories in places like Vietnam
Resin formulation fine-tuning andformulation improvement can further improve theenvironmental profile of composites
We intelligently identify potential occupational hazards, implement control measures to reduce risks, provide necessary training and equipment, and monitor the occupational health status of employees.
The minimum order quantity for our products varies depending on the product. Please contact us for more information.
Yes, we offer OEM services.
Feel safe and free to fill in the form! We do not sell, trade or transfer your personally identifiable information to any external parties.